Rubber mats doormats with antiskid rubber backrubber mats doormats with antiskid rubber back for community square and playground
Product Description
Maintenance of kindergarten rubber runways
I. Care precautions for kindergarten rubber floor
1. Various dirt on the ground should be promptly removed.
2. It is prohibited to immerse the ground in open water. Although some floors use waterproof adhesive to isolate water sources (such as floor drains, water rooms, etc.), prolonged immersion in water can seriously affect the lifespan of the ground. During the cleaning process, use a water suction machine to drain the sewage in a timely manner.
3. For areas with high pedestrian flow and significant wear, the maintenance cycle should be shortened and the number of times the surface wax is applied should be increased.
4. It is forbidden to use hard and rough cleaning tools (such as steel wire balls, scouring pad, etc.) to prevent sharp objects from colliding with the elastic floor.
5. It is strongly recommended to place foot mats at the entrance of public places with high pedestrian traffic to prevent dirt, sand, and other stains from scratching the flooring.
II. The purpose of cleaning and maintaining kindergarten rubber floor
1. Improve appearance: timely remove dirt generated during daily use, allowing the elastic floor to fully showcase its extraordinary appearance and natural glossiness.
2. Protect the ground: protect the elastic ground from accidental chemicals, cigarette butts, shoe prints, oil, and water, minimize mechanical wear on the surface, and fully utilize the durability of the ground itself, thereby extending its service life.
3. Convenient care: due to the tight surface structure and special treatment of the elastic floor itself, attention should be paid to daily cleaning and maintenance, which can make the floor easier to care for and extend its service life.
III. Maintenance methods for kindergarten rubber floor at different stages:
Cleaning and maintenance of kindergarten rubber floor after completion/before use
1. First remove any dust or debris from the ground surface.
2. Use a floor scrubber with 3M red grinding discs or similar products to clean at low speed (dilute with universal cleaning agent 1:20 in water and add to the floor scrubber) to remove protective wax, grease, dust, and other dirt from the ground surface. Use a water suction machine to absorb the sewage.
3. Wash with clean water and absorb dry.
4. Apply 1-2 layers of wax as needed.
Cleaning agent: universal cleaning agent, surface wax
Tool: ground grinding machine, red grinding disc, water absorption machine, wax dragging and squeezing machine
Detailed Photos
){kind=link}