Rigid Open Cell Foam Spray PU Foam Insulation for Roof and Wall Gap Insulation

• Molecular Principal Chain: Naphthenic Polymer
• Color: Brown
• Viscosity at 25°c, Cps: 200-300
• Shipping Cost: Estimated freight per unit.: about shipping cost and estimated delivery time.
• Currency: US$
• Return&refunds: You can apply for a refund up to 30 days after receipt of the products.
• Model NO.: LY6501
• Specific Gravity@25ºC: 1.05-1.1
• Free Rise Density,Kg/M3: 8-12
• Water Content: 1.5-2.0
• Transport Package: Steel Drum/IBC Drum/Tank
• Specification: pure
• Trademark: G-TECH@
• Origin: China
• HS Code: 3907209090
• Production Capacity: 50000mt/Year
• Package Size: 60.00cm * 60.00cm * 102.00cm
• Package Gross Weight: 218.000kg

Product Description

Rigid open cell foam spray PU Foam Insulation for roof and wall gap insulation

LY6501 is a two component water-blown (zero ozone-depleting) liquid spray system that cures to a low-density cellular polyurethane insulation material. This open cell foam is designed to provide: good thermal performance; air impermeable insulation; and, an integral part of an air barrier assembly.
LY6501 is a Class A (Class 1) fire rated foam that meets the requirements of ICC-ES AC377 Acceptance Criteria for Foam Plastic Insulation. See Intertek Research Report IRR 1009 for code compliant application information.
RECOMMENDED USES
LY6501 will provide good performance in a wide range of residential, commercial and industrial applications where in service temperatures are between -40°F and 200°F. Acceptable uses for this product include: walls, ceilings, floors, attics and crawlspaces.
PHYSYCAL PROPERTIES
The following physical property tests were conducted by independent certified laboratories with traceable samples in accordance ICC-ES AC377.

TYPICAL LIQUID CHEMICAL PROPERTIES
"A" Component contains polymeric isocyanate. "B" Component contains polyol, catalysts, fire retardants, surfactants and blowing agents.

APPLICATION
To ensure optimum performance, a minimum pass thickness of 1" (2.54 cm) is recommended with not limit to maximum pass thickness. To obtain optimum results substrate temperature should be within the ranges as stated below. All substrates must be dry at the time of application. Do not apply to wood surfaces with a moisture content of above 18%.