|
Still deciding? Get samples of $ !
Order Sample
|
| Customization: | Available |
|---|---|
| After-sales Service: | 1 Year |
| Application: | Roof |
| Shipping Cost: | Contact the supplier about freight and estimated delivery time. |
|---|
| Payment Methods: |
|
|---|---|
| Support payments in USD |
| Secure payments: | Every payment you make on Made-in-China.com is protected by the platform. |
|---|
| Refund policy: | Claim a refund if your order doesn't ship, is missing, or arrives with product issues. |
|---|
Suppliers with verified business licenses
Audited by an independent third-party inspection agency
1. Product Instruction
The fiberglass reinforced PU insulated sandwich panel is one - time continuously processed from the two - sided flexible surface materials and rigid polyurethane foam . Its middle PU rigid foam insulating layer applies the advanced technologies for the materials mixing and distributing , so as to ensure the fine cells , uniform density , high strength , and excellent heat - insulating property .| Item | Requirements |
| Insulating Material Density(kg/m³) | ≥35 |
| Heat Conductivity Coefficient w/( m.k)(Average Temperature 20ºC) | ≤0.024 |
| Water Absorption Rate(%) | ≤3 |
| Combustion Performance | Not lower than Grade E |
| Remark:B2 level specified by GB8624-1997 | |
| Item | Requirements |
| Appearance | The Panel surface should be falt and smooth,free from bubbles,deformation,scratches,stains,ets. |
| Compressive Strength(Deformation 10%)(Mpa) | ≥0.15 |
| Tensile Strengh(Mpa) | ≥0.10 The breakdown point is inside the insulating material |
| Combustion Performance | Not lower than Grade E |
| Remark:Be equivalent to the grade B2 specified by GB8624-1997.The product performance can be negotiated by both parties. | |
| Item | Allowable Devatation(mm) | |
| Thickness | ≤50 | 0.0~1.5 |
| ≥50 | 0.0~2.0 | |
| Length | ±2.0 | |
| Width | ±2.0 | |
| Diagonal Difference | 3.0 | |
| Edge Straightness | 2.0 | |
| Panel Flatness | 1.0 | |
| Remark:This Sheet is for the panel with lenghth of 1200mm and width of 600mm.For other specifications,the allowable deviations can be discussed by both parties. | ||

