Organic Solvent Resistance Good Toughness Laundry Detergent Softener Bag Solvent Free Flexible Polyurethane Adhesive

• Customization: Available
• Application: Packing
• Bonding Function: Structural Adhesive
• Model NO.: LY6810A/6810B
• Color: Clear
• Composition: Organic Material
• Morphology: Liquid
• Appearance: Yellowish Viscous Liquid
• Usage: Packing, Package, Bag, Structure
• Types of Substrates: BOPP/VMCPP,Pet/PE,BOPP/VMPET/PE
• Temperature Resistance: 100-120℃
• Packaging: 10/25/250 Kg/Barrel
• Material: Polyurethane
• Classification: Room Curing
• Main Agent Composition: Natural Polymer
• Characteristic: Weatherability
• Promoter Composition: Curing Agent
• Transport Package: Drums, IBC Drums, Tank
• Specification: pure
• Trademark: G-TECH@
• Origin: China
• HS Code: 39095000
• Production Capacity: 20000mt/Year
• Package Size: 23.50cm * 23.50cm * 37.50cm
• Package Gross Weight: 21.500kg

Product Description

 

Product Description

LY6810A/6810B is two-component solvent-free polyurethane adhesive for composite films. It is the adhesive developed for transparent films and aluminized films for composite flexible packaging. The bonded transparent plastic film product is boil-resistant for 30 minutes.
 

Product Parameters

 

Product name	Component	Solid content	Viscosity/25ºC
LY6810A	NCO	100%	500-1500 mPa·s
LY6810B	OH	100%	200-1000 mPa·s

 

Application Areas

This product is suitable for bonding of various structures of plastic-plastic. Typical application structures include
·BOPP/VMCPP · PET/PE
·BOPA/PE · PVDC/PE
·BOPP/VMPET/PE
 

Packaging & Shipping

Package:
LY-6810A: 20Kg/barrel; 200Kg/barrel
LY-6810B: 20Kg/barrel; 200Kg/barrel
In a dry and clean environment of 5ºC-30ºC, unopened products can be stored for at least 6 months. Unused products after opening must be sealed and stored and used up as soon as possible.
Shipping: 
Promote shipping usually 7--14 days after receiving TT deposit or Original LC
 

Precautions

1. During use, due to the variety of film types, printing inks, lubricants and surface treatments of each user, the process conditions of the equipment and the structure of the packaging will be different. It is recommended that each user conduct a test first and adjust the ratio of glue used appropriately.
2. After the original barrel is opened, if the adhesive is not used up, the lid should be tightened immediately to minimize the contact of the adhesive with air/moisture; the adhesive poured into the glue tank should also minimize the contact with air/moisture. If the adhesive is cured and cloudy, do not use it.
3. Because the initial tack of the solvent-free adhesive is low, the tension and pressure of each section should be strictly controlled during the operation, and the amount of glue applied should be well controlled.
4. The type of ink (polyurethane, acrylic, chlorinated polypropylene, etc.), the type and solvent residue of the ink, the fineness of the ink, etc., have an impact on the bonding strength of the composite film, the appearance of the composite, and the ratio of the adhesive. So test it before using it.